噴碼機初級保養，噴花處理方法
Release time：8/17/2018 10:55:44 AM
一、Boot step
1、For the first boot, please check the ink and solvent for the required range (ratio 1:2) and the connector is normal.
2、Open the cover, turn on the power, and close a red power switch on the left side. Press the "POWER" button in the upper right corner of the page below. Go to the main menu.
3、Start system
二、Print information reading and date modification
三、The direction of the printing is adjusted during the printing process. The direction of the nozzle and the sensor can be adjusted according to the direction of the deviation, and the direction can be adjusted to the appropriate direction.
四、Simple processing method for inkjet printer spraying (must turn off the nozzle switch)
1、Spray printing information in the lower half of the spray, disadvantages: open the nozzle cover, clean the outer wall of the recovery tube; clean the inner wall of the electromagnetic valve.
2、The upper part is grouped into a line: the value is set too large and is adjusted to between 4-6.
五、Primary maintenance of inkjet printer
1、Wipe the surface dust with a dry cloth on the outer casing of the printer.
2、Check the print head clean every day, and pour the nozzle into the rag with a small amount of special cleaning solution.
3、Check for ink on the inner wall of the solenoid valve and wipe it in the same way as the nozzle
4、Use the observation window to check whether the ink line is normal (the circular window in the middle of the nozzle cover looks in, the gap between the points is relatively large, and the points are not connected together).
5、Check if each button is normal. The use of the printer in strict accordance with the operating specifications not only reduces the failure rate but also extends the life of the printer.
Article by: Foshan inkjet printer Yucheng Packaging Equipment Co., Ltd. provides the arrangement, this view does not represent the viewpoint of this site
